Remove Hard Water Spots from Shower Glass and Help Prevent Future Water Spots & Soap Scum
Tired of hard water spots, soap scum, and mineral buildup clouding your beautiful glass shower doors? You’re not alone. One of the most common cleaning conundrum is: “How do I clean my shower glass properly to remove water spots and soap scum, and keep it from getting dirty again?”
The good news is, it’s easier than you think, with the right tools and a little know-how. In this blog post, I’ll walk you through how to remove water spots from your shower glass and how to apply ceramic coating to prevent future buildup. Not only will your shower sparkle, but you’ll also save time and effort in your regular cleaning routine.
Why Water Spots Happen and Why They Are So Tough to Remove
Hard water contains high levels of calcium, magnesium, and other minerals. When water droplets evaporate, they leave behind mineral deposits that create those cloudy white stains on your glass. Over time, soap scum and hard water stains can bond to the surface and become incredibly difficult to remove.
The key? Break down the mineral bonds and seal the glass to prevent future damage.
Step 1: Prepping the Shower Glass for Cleaning
Proper prep is critical for effective stain removal and long-lasting ceramic protection.
Tools You’ll Need:
Eraser Sheets (non-abrasive and perfect for glass when used lightly) and a household cleaner like this - this is the method I use
Instructions:
Dry wipe the glass to remove loose dust and debris.
Spray your cleaner generously across the entire glass surface.
Use Eraser Sheets to gently scrub the entire panel, focusing on stained areas.
Wipe off residue with a clean microfiber towel.
Allow the glass to fully dry before moving to the next step.
Pro Tip: Always work in sections to make sure no area is missed, especially near corners where buildup tends to collect.
Step 2: Removing Water Spots
Both of these hard water stain removers are top-rated.
Option 1: Heavy Duty Water Spot Remover Gel (For Glass only)
How to Use:
Shake the bottle well.
Apply a small amount to a microfiber applicator or pad.
Work the product into the glass in circular motions in small sections.
Let sit for 1–2 minutes (do not allow it to dry).
Rinse thoroughly and wipe clean with a microfiber towel.
Repeat if necessary.
Option 2: Hard Water Stain Remover
How to Use:
Scrub the glass surface using firm pressure.
Rinse product thoroughly with warm water until residue free.
Wipe dry and inspect. Repeat if needed.
Important: Always test in a small area first to ensure compatibility with your shower glass.
Step 3: Protecting Your Glass
Once your glass is clean and spot-free, it’s time to protect it from future damage. Ceramic coatings create a hydrophobic barrier that repels water, soap scum, and minerals—making cleaning a breeze.
Option 1: Ceramic Coating for Glass
How to Apply:
Ensure the glass is fully clean and dry.
Spray Ceramic Coating directly onto the glass or onto a microfiber applicator.
Spread evenly across the surface using vertical and horizontal strokes.
Buff off any excess with a clean microfiber towel.
Allow it to cure for a couple hours.
Let it sit for at least 4 hours before exposing to moisture for maximum protection.
Option 2: HydroView Ceramic Glass Coating + Cleaner
Perfect for quick application with dual-action benefits.
How to Apply:
Shake well and spray product onto a microfiber towel.
Spread evenly across the surface.
Flip the towel to a dry side and buff for streak-free clarity.
These are great maintenance products and can be reapplied every few weeks for continuous protection.
Maintenance Tips for Spotless Shower Glass
Use a daily shower spray or squeegee after each use.
Reapply ceramic coating every few weeks depending on usage.
Avoid abrasive sponges or scrubbers—Eraser Sheets are a gentle, effective option, when used lightly.
Recommended Product List (Add to Cart)
Maintaining clean and clear shower glass doesn’t have to be a battle. With the right prep, targeted stain removers, and a high-quality ceramic coating, you can win the war against hard water stains and soap scum for good.
